Copper Flat Wire

Flat Wires

Flat wires can be produced with a minimum width of 2.00 mm, a maximum width of 6.00 mm, a minimum thickness of 0.20 mm, and a maximum thickness of 2.50 mm, which will generally be used in the manufacture of metal zippers.

Copper Flat Wires are produced according to various dimensions and thicknesses. It is generally used in the manufacture of Metal Zippers.

Electrical and Thermal Conductivity
Corrosion and Wear Resistance
Resistance
Cold Forming and Machinability
Soldering, Welding and Coating Compliance

Usage Areas

Zipper Indistury

Electrical and Electronics Industry

Construction and Plumbing Industry

Automotive Industry

Textile Accessories

Defense Industry

Decoration

Fittings

Chemical Composition

Alloy	EN NO	Cu%	Sn%	P%	Ag%	O%
Cu-ETP, E - Cu58	CW004A	99,90	---	---	0,0025	0,040
Cu-DHP, SF - Cu	CW024A	99,90	---	0,015 0,040	0,0025	---
CuSn0,15	CW117C	99,90	0,15	0,006	---	---
Cu-PHC, SE-Cu	CW020A	99,99	---	0,001 0,006	---	---

Physical Properties

Alloy	EN NO	Density g/cm³	Electrical Conductivity MS/m	Electrical Conductivity %1 ACS	Thermal Conductivity W/mK	Modulus of Elasticity kN/m²
Cu-ETP, E - Cu58	CW004A	8,94	58	100	390	127
Cu-DHP, Sf - Cu	CW024A	8,94	46	79	340	132
CuSn0,15	CW117C	8,90	51	88	350	130
Cu-PHC, SE-Cu	CW021A	8,94	58	100	390	127

Norm Correspondence Table

Alloy	EN NO	UNS (USA)	BS (UK)	NF (FRANCE)	UNE (SPAIN)	JIS (JAPAN)
Cu-ETP	CW004A	C11000	C101	Cu-a1	C-1110	C11000
Cu-DHP, SF-Cu	CW024A	C12200	C106	Cu-b1	C-1130	C12200
CuSn0,15	CW117C	C14410	---	---	---	---
Cu-PHC, SE-Cu	CW020A	C10300	---	---	---	---

Mechanical Properties

Alloy	Hardness	Tensile Strength N/mm² Minimum	Tensile Strength N/mm² Maximum	Yield Strength N/mm²		Elongation % Minimum	Hardness HV Minimum	Hardness HV Maximum
Cu-ETP E-Cu58	H040	220	260	Maximum 140		33	40	65
	H065	240	300	Minimum 180		8	65	95
	H090	290	360	Minimum 250		4	90	110
	H110	360	---	Minimum 320		2	110	---
Cu-DHP SF-Cu	H040	220	260	Maximum 140		33	40	65
	H065	240	300	Minimum 180		8	65	95
	H090	290	360	Minimum 250		4	90	110
	H110	360	---	Minimum 320		2	110	---
CuSn0,15	H060	250	320	Maximum 200		9	60	90
	H085	300	370	Minimum 250		4	85	110
	H105	360	430	Minimum 300		3	105	130
	H120	430	490	Minimum 350		2	120	140
Cu-PHC SE-Cu	H040	220	260	Maximum 140	9	45	65	90
	H065	240	300	Minimum 180	4	65	95	110
	H090	290	360	Minimum 250	3	90	110	130
	H110	360	---	Minimum 320	2	110	---	140